- Pure polypropylene construction
- Fast rinse-up in high purity applications
- Wide chemical compatibility
- Automated packaging for a clean-finished product
- NSF Standard 42 certified
Applications:
- High Purity Chemicals
- Oil & Gas
- Bottled Water
- Electronics
- Pre-treatment for Reverse Osmosis
High Dirt Holding Capacity:
- High dirt-holding capacity means longer life and fewer changeouts, saving time and money
- True-graded density captures particles throughout the entire filter depth
- Lower density at the surface of the filter with progressively higher density toward the centre
- No surface blinding, which reduces flow and increases filter changeouts
Wide Range of Lengths and Adapters:
- Standard lengths fit most housings custom lengths can also be provided
- Wide range of polypropylene end-adapters including gaskets, extended cores and GE patented self-seal polypropylene springs
Dimensions:
Nominal O.D. = 2.5″ (6.4 cm) Nominal I.D. = 1″ (2.5 cm)
Product specifications for Hytrex depth cartridge filter
Additional Information
Hytrex cartridge filters are made from thermally-bonded fibres of polypropylene. GE certifies that it uses no resin binders, lubricants, antistatic or release agents or other additives in the manufacture of these cartridges and that the resin used for manufacturing the filter media meets the food contact requirements of U.S. FDA21CFR regulations. When required, specify only FDA compliant sealing materials and end adapters.
GE filter cartridges are designed and manufactured for resistance to a wide range of chemical solutions. Conditions will vary with each application and users should carefully verify chemical compatibility. Please contact your GE distributor for more information.
*) Data based on 10” length filter with clean water.
*) Data based on 10” length filter with clean water.
Ordering Information
If you are ordering Hytrex filters with standard ends (with no adapter on either end), select one designation from each of the first three columns. your product Order Number will look like this: GX05-291/4. If you are ordering Hytrex with one or more end adapters, select designations from all applicable columns. Your Product Order Number will look like this: GX05-29 1/4 YYP or GX05-29 1/4 XK
| Designtryk: | 16 bar |
| Prøvetryk: | I henhold til EN 13445 |
| Differenstryk max: | 3,0 bar |
| Arbejdstemperatur max: | 150°C (Fluida grp. 2 og damptryk < 0,5 bar) |
| Volumen: | 89,0 liter |
| Vægt: | 200 kg |
| El-forsyning: | 3 x 230/400V, 50 Hz |
| Luftforsyning: | 5-7 bar, filtreret |
| Flangetilslutning: | DN150 EN1092-1/11 |
| Dræn: | Rp2 eller DN50 EN1092-1/11 |
| Volumen på drænkammer: | 6,3 liter |
| Filtreringsområde: | 30-50-100-150-200-300-500-1000 mikron |
* Santoprene is a registered trademark of Advanced Elastomer Systems, L.P.
** Viton is a registered trademark of DuPont Dow Elastomers
