HiFlux Auto-line filters are designed as compact self-cleaning automatic filters with a wide range of applications. The sturdy construction of the filter makes it well suited for industrial and hygienic applications in which operational reliability and dependability are essential.
The Auto-line filter is used in many sectors such as paint, cooling water, energy, wastewater, dairy, chocolate, thickeners, beverage, oil and fats, chemical, sugar, paper industry and CIP liquids.
The Auto-line filter is used when an automatic continuous cleaning process is required. The impurities are being concentrated in the filter until it is drained away. The drainage is done, while the filter is still in operation, which makes the liquid loss due to cleaning minimal.
The MLE filter has an extended pneumatic cylinder, so that cross-contamination between the liquid to be filtered and the pneumatic system is avoided.
In the design of the filter, it was very important to make the construction robust and reliable. By limiting the number of moving components, wear and maintenance requirements are minimized. The simple construction makes the filter very easy to service since there is no need for external service assistance or special tools. Furthermore, the compact design of the filter is making it suitable for locations, where height is a limitation.
Special versions can be supplied according to customer requirements.
Typically other temperature and/ or pressure levels.
Capacity: 12 – 47 m3/h
Filtration: 30 – 2000 µm
Pressure: 16 bar
Applications: Hygienic & Industry
Product specifications for self-cleaning filter
HiFlux Auto-line filters are manufactured of stainless acid-resistant steel. The filter meets current standards and norms for pressure vessels complies with the Machinery directive and can be CE labelled.
The filter is available ready for installation, complete with an electronic controller and automatic drain valve. In addition, the filter is available with or without a pneumatic controller.
|Filter vessel and element||EN 1.4404 steel|
|Design pressure:||16 bar|
|Test pressure:||According to EN 13445|
|Max differential pressure:||3-7 bar|
|Max working temperature:||150°C (Fluid grp. 2 and steam pre. < 0,5 bar)|
|Power supply:||240 VAC/50 Hz|
|Air supply:||5-7 bar, filtered|
|Flange connection:||DN50 EN1092-1/11|
|Sludgechamber volume||0,9 litres|
*Customized solutions can be manufactured upon request.
Capacity (at a viscosity of 1 cSt and as a pressure filter)
|Diff. pressure||Strainer area cm²||30*||50*||100*||150*||200*||300*||500*||1000*|
*) Capacity in different filtration rates m³/ h/ µm
The filter should only be installed as a pressure filter in systems that have a positive overpressure (the surroundings must be taken into consideration).
All Auto-line filters are standardly produced according to the pressure equipment directive 2014/68/EU article 4, section 3. The filters can be delivered with approval according to category I, II, III or IV. The Auto-line filters comply with the Machinery directive 2006/42/EC. Auto-line filters can be delivered with approval for use in explosive atmospheres (Equipment-category 2, zone 1) according to directive 2014/34/EU.