PHARMadapt ESP
ADAPTERS & FITTINGS
Gap free process connection for temperature measurement without process opening. Suitable for pipes from DN10 on.
With the ESP installation system, an thermowell is permanently installed in the process. The slim tip of the sensor is inserted into this thermowell and held in contact by a spring. It is therefore not in direct contact with the medium.
The sensor can be removed at any time for recalibration or replacement, without electrical disconnection and without opening the process, and consequently without necessity to shut down the plant or to stop the process.
- Variable: Installation in tanks using welding sockets or adapters. Installation in pipes using tees or elbows with integrated thermowells
- One for all: One sensor type with the same probe length can be used for differing pipe widths, thus minimizing spare parts inventory and planning requirements
- Tailored to requirements: Special design for pharmaceutical applications
Technical Specification | |
Process Connection | PHARMadapt ESP Weld-in thermowells | Adapters | Pipe Tees | Pipe elbows |
Wetted material | 1.4435 (316L) | Ra ≤ 0,8 μm / 0,6 μm / 0,4 μm |
Available versions | Compact |
Life Science Industry Process Connections:
PHARMadapt ESP – Temperature measurement in pipes from DN10 on and vessels without direct contact between the sensor and the medium. With the ESP installation system, an thermowell is permanently installed in the process. The slim tip of the sensor is inserted into this thermowell and held in contact by a spring. It is therefore not in direct contact with the medium. The sensor can be removed at any time for recalibration or replacement, without electrical disconnection and without opening the process, and consequently without necessity to shut down the plant or to stop the process.