A compact design and the maximum number of built-in filter cartridges ensure the best possible flow and consequently a small differential pressure, long intervals between cartridge changes and lower energy consumption.
The filter housing, which is designed in accordance with the pressure vessel norm, is supplied in stainless acid-proof SUS316 steel.
The filter housings are equipped with supporting tubes to give the cartridges a better tolerance when it comes to the differential pressure and temperature.
The filter housings are electropolished to achieve a smooth and uniform surface that is easy to clean and maintain.
Not included in the catalogue is the product range of HiFlux cartridge filters and special filter cartridges for high temperature/pressure uses, e.g. for condensate at 220 oC and 53 bar.
For other options see also HiFlux TP, HiFlux TWP and HiFlux Micro-Line filters.
Capacity: 1 – 42 m3/h
Filtration: 0,2 -300 micron
Pressure: 7 bar
Applications: Industry
Product specifications
Type | A mm |
B mm |
Cartridge filters D.O.E |
Capacity * m³/h |
Drain plug |
Air vent. plug |
Connection thread |
Fittings type |
---|---|---|---|---|---|---|---|---|
PWL-1 | 400 | 95 | 1 x 10″ | 1,5 | ¼” NPT | ¼” NPT | R1 | Vee clamp |
PWL-2 | 650 | 95 | 1 x 20″ | 3,0 | ¼” NPT | ¼” NPT | R1 | Vee clamp |
PWL-3 | 900 | 95 | 1 x 30″ | 4,5 | ¼” NPT | ¼” NPT | R1 | Vee clamp |
*) The capacity is based on the viscosity of 1 cSt and is not affected by cartridge type, degree of filtration in microns or dirt load.
Design pressure: | 7 bar |
Test pressure: | 10,5 bar |
Max. working temperature: | 100° C |
Connection: | Thread EN 10226 |
Filter cartridges: | See data sheets for filter cartridges |
Cartridge types: | D.O.E: Cartridges with both ends open |
Gasket: | EPDM |