The Centralised sampling system is a modular system and
each section is equipped for taking out samples from up to 12
tanks. See flow sketch on reverse. On tank no. 1 to 12 on the
flow sketch, you will find the SCANDI BREW® Pneumatic
sample valves that are mounted on the tanks.
For mounting the pneumatic sample valve different methods
are foreseen. For new stainless steel tanks the valve is welded
into the tank wall and for existing tanks, the valve can be
supplied with special thread to fit a socket.
The sampling panel is placed for easy access and handy
operation. However, as straight and simple pipe mains as
possible is recommended. Due to pressure loss the distance
from the panel to the sample valves should be maximum 100
–120 pipe metre.
Service utilities are connected to the bottom side of the
sampling panel and the tank sample valves to the top of the
sampling panel.
The sampling panel is connected via pipes of Ø10 mm to the
pneumatic sample valves on the tanks. The connections can
either be stainless steel pipes or Teflon hoses, with or without
insulation, depending on local conditions.
Benefits
• Fully automatic and safe sampling from selected tanks
• “Fool proof” operation
• Highly sanitary sampling
• Economic solution compared to “cat-walk” installations
• Optimal sampling point position on tank regardless of tank
construction and access
• Simultaneous sampling and or CIP
