Friction free Rotary union
These Friction free rotary unions, are specially developed for long life operation with high speed rotation.
Sealing is achieved by a reduced clearance between a tube in rotation inside a stationary hole.
Advantages of this patented principle:
- No friction = No wear, no maintenance
- Long life time
- Reduced driving torque
- Can be used at high rotation speed
- No need for lubrication
![]() |
![]() |
![]() |
JC-1-1-M (Ø 6.4 mm) | JC-1-1-A (Ø 9 mm) | JC 1-1 MN (for installation inside a shaft). |
Manufacturing :
Housing in aluminium or brass, shaft in chromed steel or stainless steel. Construction with two bearings.
Technical data:
Single input/ output line | yes |
Passage diameter (mm) : | 4 / 6,4 / 9 |
Max. pressure with compressed air : | 9 bar |
Max. pressure with other fluids : | 50 bar |
Min. vacuum : | -0,95 bar |
Max. rotation speed : | 3500 rpm |
Note: The technical design can give a light leakage (depending on fluid nature).
Range of products :
JC-1-1-M | JC1-1-A | JC-1-1-B | ||
![]() |
Ø input (Dp) | 4 mm | 6,4 mm | 9 mm |
Ø input (De) | 1/4’’G | M10 x 1 | M16 x 1,5 | |
Ø output (Ds) | 1/8’’G | M12 x 1,5 | 3/8’’G | |
Dimensions (D x L) | 28,5 x 86 mm | 36 x 121.5 mm | 45 x 115 mm |
