The filter is designed for a 16 bar design pressure at temperatures of up to 110°C (water) or according to customers requirements.
The lid is designed in such a way that it can be opened and closed quickly -without using tools, which makes cleaning fast and simple so for the filter to be put back into operation quickly.
In the bag filter version, the filter is used where there is a need for reliable fine filtering from 1 micron with a large dirt capacity. Filter bags are available in several material types and filtration ranges (see also datasheet for filter bags).
In the strainer filter version, the filter is used where there is a need for a large flow and dirt capacity and small differential pressure.
As standard, the direction of flow is from the inside and out through the filter insert. The dirt is retained in the filter insert, which can be lifted out and cleaned. It is possible to use the strainer filter with reverse flow. This means that the dirt is retained on the outside of the strainer and it is possible to remove the sludge from the filter by fitting a valve into the drain.
The filter can be fitted with a unique magnetic system which makes it possible to collect magnetic particles as small as less than 1 micron. The magnetic insert is designed as an integrated part of the bag insert for simple and fast handling -again without any use of tools -in connection with cleaning.
The magnetic insert is of the HiFlux type which is fitted with Neodymium magnets. In comparison to conventional ceramic magnets provides a magnetic field that is seven times stronger, resulting in significant increases in both efficiency and capacity.
Fittings for suspending the filter can also be supplied as an extra option and should be fitted directly onto the filter housing.
The filter is shown with DN 50, PN16 EN 1092-1 flange. Other connection types can be supplied in accordance with customers specifications. Standard with R2 nipples.
For other options see also HiFlux Micro-line 1050, HiFlux TS and HiFlux TP filters.
Capacity: 12 – 31 m3/h
Filtration: 1 – 1000 µm
Pressure: 16 bar
HiFlux Micro-line 1050 SS is manufactured in stainless acid-proof EN 1.4404 steel and accommodates current standards and norms for pressure vessels-
|Design pressure:||16 bar|
|Test pressure:||EN 13445|
|Max. differential pressure:||1,0 bar (bag filter), 2,0 bar (strainer filter)|
|Max. working temperature:||110°C (water) or according to customer requirements|
|Flange connection:||Nippel R2 EN 10226-1 or flange DN 50, PN16 EN 1092-1|
|Filter bag (PP):||1-5-10-25-50-100 micron (max. 90 °C)|
|Filter bag: (PA):||10-50 micron (max. 120°C)|
|Strainer filter (EN 1.4301):||25-30-50-100-250-500-1000 micron|
|Magnetic system:||HiFlux magnetic insert for both strainer and bag filters|
A special strainer or bag for higher temperatures (max. 150°C) is available.
Capacity: (at a viscosity of 1 cSt and as a pressure filter)
|0,05 bar **||0,10 bar **||0,15 bar **||0,20 bar **|
|Bag filter (1 μm)||1050||12,0||16,0||19,0||22,0|
|Mag. Bag filter*||1050||13,0||19,0||230||26,0|
|Strainer filter (25 μm)||1050||15,0||22,0||26,0||31,0|
|Mag. Strainer filter*||1050||16,0||22,0||26,0||31,0|
* Optimum retention of magnetic particles as small as 1 micron is achieved by a flow of <10 m3/h when fitted with the HiFlux magnetic system.
**) Capacity in m3/h at a differential pressure of